NC894DKB
Isolatable Monitoring Point, Button Reset
Trade Price
£42.09
Per
1
Unit
EACH
Pack Quantity
Information
A keyswitch-isolatable monitoring point c/w magnetic door contacts for use with C-TEC’s 800 Series Call System. Can be used to monitor any device with a normally open or normally closed switch. Triggers a Standard call when activated Typical uses include monitoring fire exits, drug cupboards, store rooms, etc. Isolation keyswitch temporarily turns off the device’s monitoring function when in the ISOLATED position. Red reassurance LED illuminates when a call is made. Includes a RESET button for cancelling calls. Mounts on a standard UK 25mm single gang flush or surface back box.
Technical Specifications
Quiescent current
0mA (none).
Alarm current
Determined by the type of control equipment and number / type of field devices connected to the system.
Indicators
Red Reassurance LED (lit constant for Standard calls).
Controls
Isolation keyswitch (switches monitoring off when ISOLATED); Reset button (cancels Standard calls made from the monitoring point and from devices wired on the same Zone).
Connections
SIG (Signal); RC (Signal); -Ve (Negative); SW- (Switched Negative); NO (normally open connection); NC (normally closed connection); T (trigger connection). PLK1 link for n/o or n/c operation.
Onboard 6.35mm Remote Jack Socket
No.
Onboard Infrared Receiver
No.
Product dimensions (mm)
87 W x 87 H x 35 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish
Plastic.
IP Rating
IP41.
Weight
84g
Operating conditions/temperature
-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Product dimensions:
87 W x 87 H x 24 D mm. Mounts on a 25mm UK single gang back box.
Document Links
Datasheet