EVC302F

Brushed Stainless Steel Disabled Refuge Outstation, flush

Trade Price

£217.15

Per

1

Unit

EACH

Pack Quantity

EVC302F
EVC302F
EVC302F

Information

An attractive Type B disabled refuge outstation. Stylishly finished in high-guality, brushed stainless steel. Suitable for use with C-TEC’s SigTEL disabled refuge / emergency voice communication system. Allows anyone located in a disabled refuge area to communicate with a SigTEL Master Controller at the touch of a button (and vice versa). Offers true duplex speech. Features a ‘Push to Call or Answer’ button, a ‘Call in Progress’ LED, buzzer, microphone and loudspeaker. Includes connections for an optional induction loop system and a general-purpose open collector output that closes on activation of the unit.  Meets and exceeds the requirements of BS 5839-9 when correctly installed.

Technical Specifications

Approvals/certifications

Facilitates compliance with BS5839-9 when correctly installed.

Supply/operating voltage

11V DC derived from a compatible SigTEL Master Controller (drops to 6 V DC when in use).

Quiescent current

3mA

Activation current

25mA (current draw when intercom is in use).

Open collector outputs

O/P +Ve & O/P –Ve (closes when outstation is active, typically used to trigger a third party CCTV camera, opto-isolated, normally open, max. 24 V DC, 3 mA).

Indicators

Red call in progress LED

Controls

External 'Push to Call or Answer' button (Off Hook); Internal Loudspeaker volume control; Engineer’s “On Hook” and “Off Hook” pins.

Expansion connections

AFILS +Ve & AFILS –Ve (typically connected to the line-level input of an optional induction loop amplifier): Off-Hook and -Ve (can be optionally connected to an NC951 accessible toilet alarm kit

Product dimensions (mm)

175 W x 250 H x 53 D mm. Hole required for flush mounting: 156 W x 232 H x 51mm D approx (no bezel required).

Construction & finish

Brushed stainless steel.

IP Rating

IP20.

Weight

1.5 kg.

Operating conditions/temperature

-5ºC to +40ºC. Max relative humidity: 95%.

Notes

Microphone frequency response 250 Hz to 5 kHz ±3 dB; Loudspeaker frequency response 250 Hz to 4 kHz ±3 dB; Audio output level: 0 dB (775 mV) balanced line.

Product dimensions:

160 W x 240 H x 53 D mm. Designed for flush mounting only.

Hole required for flush mounting:

156 W x 232 H x 51mm D approx (no bezel required)

Document Links

Catalogue page

Datasheet