Article number:

VX 5309.166

Material

Sheet steel

Aluminium

Plastic

Surface finish

Enclosure frame: Dipcoat-primed

Interior installation: Spray-finished

Rear door and roof: Dipcoat-primed, powder-coated

Front door: Aluminium, anodised/spray-finished

Colour

Enclosure frame, rear door and roof: RAL 7035

Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005

Interior installation, vent grille at the front, base/plinth: RAL 9005

Handle and hinges: RAL 9005

Supply includes

VX enclosure frame with doors and roof plate

Aluminium/sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges

Sheet steel rear door, vented (vented surface area approx. 85% perforated), vertically divided, 180° hinges

Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E

482.6 mm (19") mounting angle, standard, variably screw-fastened to depth stays at the top and bottom

Side panels, one-piece, for screw fastening

Roof plate, multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate

Base module mounted at front as infill panel

Base/plinth system VX, 100 mm, vented

Base/plinth corner pieces and trim panels, sides, screw-fastened

Base/plinth trim panels, front and rear plus corner and baying covers supplied loose

4 levelling feet, M12, including base/plinth adaptor (supplied loose)

Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.

12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)

25 multi-tooth screws, conductive (supplied loose)

4 combination rails for inner and outer mounting level, to fit rack depth (supplied loose)

10 cable shunting rings, metal, 125 x 65 mm (supplied loose)

IPPC pallet

Base module mounted at front as infill panel, depth 75 mm

Dimensions

Width: 800 mm

Height: 2,000 mm

Depth: 1,000 mm

Units

42 U

Height including base/plinth

2,100 mm

Free mounting space to the 482.6 mm (19") level, front/rear

87 mm / 193 mm

Distance between levels as delivered

720 mm

Design

Pre-configured

Cover version

multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate

Mounting angle version

482.6 mm (19") mounting angles, standard in the VX IT

Base design

Base module mounted at front as infill panel

Load capacity

15,000 N

Max. load capacity (static) per enclosure to UL 2416

12,000 N

Note

Depending on how and where it is sited, the door opening angle may vary for selected applications

Basic material

Sheet steel

Construction rear door

Sheet steel door, vented, vertically divided, 180° hinges

Construction front door

Aluminium/sheet steel door, vented, one-piece, 180° hinges

Packs of

1 pc(s).

Weight/pack

155 kg

EAN

4028177945128

ETIM 7.0

EC002499

ECLASS 8.0

27180207