Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
SER8300 Series room controllers are used for Line Voltage Fan Coil Unit control with SC3000 Relay Packs. The room controllers rated supply voltage is 7V DC at 2.4watts or 24V AC 50/60Hz Class 2, 4VA. The room controller is colored white and is equiped with a communication port that uses BACnet MS/TP protocol and a PIR sensor. Its Room and Outdoor Air Temperature Display Range is between -40 and 50 oC. The measurement accuracy is +/- 0.5%. The temperature setting range is 12 to 37.5oC for cooling and 4.5 to 32 oC for heating. The room controller is equiped with 2 digital inputs, 5 analog inputs (5 to 10V), 4 analog outputs, and 5 digital outputs. The analog output voltage is 0 to 10V DC at < 5mA into > 2 kOhm resistance. The digital output rating is 28V AC 50 or 60 Hz, 0.3A, 1.5A inrush current. The product follows the following standards: IEC 61326-1: 2005, FCC part 15 subpart C, RSS 210 issue 8, FCC part 15 subpart B, ICES-003, EN 60950-1: 2006/A2, EN 60950-1: 2013, ETSI EN 301 489-1: v1.9.2. The product follows the directives: 2014/30/EU - electromagnetic compatibility, 2014/35/EU - low voltage directive, 2014/53/EU - radio equipment directive. The ambient air temperature for operation is between 0 and 50oC. The relative humidity for operating or storage is between 0 and 75% non condensing. The humidity reading range is 10 to 90% RH non-condensing.
Product name
SE8000 Series
Device short name
SER8300
Product or component type
Room controller
Device application
Line voltage fan coil
Net weight
340 g
AWG gauge
AWG 24...AWG 18
Targeted region
North America.
height
120 mm
Width
86 mm
Temperature resolution
0.1 °C
Humidity measurement drift
Less than 1 % yearly
Directives
2014/30/EU - electromagnetic compatibility 2014/35/EU - low voltage directive 2014/53/EU - radio equipment directive
[In] rated current
4 A
Depth
25 mm
Ambient air temperature for operation
0…50 °C
Market segment
Lodging/hotel Small commercial Buildings Healthcare Non-critical buildings Office Residential School
Housing colour
White
Ambient air temperature for storage
-30…50 °C
Measurement accuracy
Temperature: +/- 0.5 °C, Humidity: +/- 5 %, 20...80 % RH (non-condensing) Humidity: +/- 10 %, 10...20 % (non-condensing) Humidity: +/- 10 %, 80...90 % (non-condensing)
Information displayed
Temperature: - 40...122 °F
Network frequency
50 Hz 60 Hz
Communication port protocol
BACnet MS/TP Modbus RTU
Input voltage
0...10 V DC
Temperature setting range
12…37.5 °C cooling 4.5…32 °C heating
Calibration certificate
1 pt
Output voltage
24 V AC for relay output 0...10 V DC for analog output
Relative humidity
0…95 %
Output current
1 A relay output
Input type
2 x dry contact 5 x analog
Sensor type
10 kOhm T2 NTC thermistor temperature Space RH sensor humidity Bulk polymer humidity
Output type
5 xrelay output 4 xuniversal
[Us] rated supply voltage
7 V DC 50/60 Hz +/- 10 %
Standards
EN/IEC 60730-1 FCC part 15 Subpart B ICES-003 ETSI EN 300 328 ETSI EN 301 489-1:v1.9.2 FCC part 15 Subpart C UL 60730-2-9 ETSI EN 301 489-17:v2.2.1, 2012
Humidity setting range
30…95 %
Range
EcoStruxure Building Expert
Economizer
Yes
Humidity control
Yes
PIR cover
Yes
Scheduling
No
Surface finish
Matt
Surface treatment
Untreated
Function available
Fan control HVAC control Available with CO2/RH/T Brightness sensor Changes can be made directly over display Code lock function Easily configurable Firmware update by USB
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.7 cm
Package 1 Width
10.6 cm
Package 1 Length
15.2 cm
Package 1 Weight
220 g
Warranty
18 months
Datasheet