QT601-2
Quantec Controller
Trade Price
£419.07
Per
1
Unit
EACH
Pack Quantity
Information
Supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software). Includes a library of 40 pre-set & 45 custom place names. System setup requires a laptop PC running Quantec’s QT707 programming tools. Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure. System wiring requires one or more QT603 network splitters. Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs).
Technical Specifications
Mains supply
230V 50/60Hz.
Mains rated current
350mA maximum.
Internal power supply
27Vdc nominal.
Total output current limited to
3A @ 230Vac.
Quiescent current
100mA @ 24V
Max battery size and type
2 x 12V 7Ah VRLA connected in series.
Open collector outputs
OP1 (active on standard call); OP2 (active on help req. call); OP3 (active on emergency call); OP4 (active on attack call). OP5 (failsafe fault output). Voltfree single pole c/o. Max. switch curren
Other outputs
24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA.
PC connection
CONN1 provides an RS232 connection for use with our Quantec Surveyor data management software (via a PC) or a Quantec Printer.
Indicators
2 line x 40 character backlit display; Power LED (lit when power is present, off when no power present).
Controls
Accept (A); Scroll Up; Scroll Down; Code Entry Buttons (1, 2, 3 and 4); Escape (E).
Connections
Plug-on type, largest acceptable conductor size 1mm2.
Expansion connections
CONN2 provides an RS232 connection for paging equipment.
Product dimensions (mm)
410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Construction & finish
Metal base, plastic lid.
IP Rating
IP30.
Weight
3.5Kg.
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Product dimensions:
410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Hole required for semi-flush mounting:
412 W x 255 H x 50 D mm. Requires QT385 bezel
Document Links
Datasheet