Information

Characteristics: * Comes complete with integral photocell and the facility for wall switch override. * Can be programmed for absence or presence. * Range 7m diameter for large movements, 5m diameter for small movements. * Factory presets, lux = 400, time = 20 min, presence detection. * EEK001 programming tool is easy to use with 2 memory settings to enable repeatability. * EEK002 remote control comes with a wall mounting bracket for storage and allows room occupant to have control of lighting output. * EE883 The detection range diameter is adjustable from 1 to 8 metres. The hyper frequency sensor allows for detection of movement through partitions (drywall, wood, glass) independent of temperature detection. 360° Detection area. IP54 rated. 230V AC. Complies with EN 60669-1, EN 60669-2-1, EN 301489-1, EN 301489-3, EN 300440-1, EN 300440-2. * EE880 Infra-red corridor motion detector for surface mounting. 230V AC. IP54 rated. Detection zone of 4m x 20m. Overrun timer from 5 seconds to 15 minutes. Complies with EN 60669-1 & EN 60669-2-1. * EE810 - one channel detector. Provides direct control of a light load or can be used as a slave with EE811 for enlargement of detection area. Lux level and ON delay (duration or pulse) defined via potentiometers. Test mode in order to set lux level and the detection pattern. * EE811 - two channels detector. Lux level and ON delay adjustable via potentiometers. Input for slave (EE810) and/or remote push button. 230V wall switch override. Complies with EN 60669-1 & EN 60669-2-1.