The Choice PR3n is a three channel programmer, offering three completely independent time controlled channels. Ideal for control of 2 individual heating zones and separate hot water control. The multi-channel capabilities enables installers to comply with Part L of the amended Building Regulations by providing separate time and heating control for living and sleeping areas whilst also providing timed control of hot water.

The programmer can be configured for 24 hour, 5/2 day or 7 day operation, and the flexibility of up to three on/off timings per day.

Pre-programmed but can easily be changed to suit your particular lifestyle

Large and clear to read illuminated display

Attractive modern design that will suit all contemporary homes

Suitable for pumped systems

24 hour, 5/2 day and 7 day selectable

2 or 3 ON/OFF periods selectable

1,2 or 3 hour boost

Advance to next programmed event

Automatic Summer/Winter time change

Factory set time & date

Program options - ON, OFF, All day or Auto

Mains powered with battery backup

Standard wall plate - simple plug in and replace

Choice PR3n fits most common industry standard backplates, which means it will replace most equivalent programmers on the market. It has the ability to control two heating zones, as well as hot water. The Choice PR3 is the ideal programmer to meet the requirements of Building Regulations Part L for dwellings over 150m2 (Part J in Scotland and Part F in Northern Ireland).

Supply voltage

230V a.c.

Supply Frequency

50-60 Hz

Contact type

1B , Micro-Disconnection (Voltage Free)

Battery type

Lithium Cell CR2032

Operating temperature

0°C to 40°C

Total switch rating

230V AC, 2(1)A (per channel)

Enclosure protection

IP30

Plastics

Thermoplastic, flame retardant

Insulation class

Double

Wiring

5

Backplate

Industry standard

Dimensions

140 x 87 x 37mm

Clock

12 hour am/pm, 1 minute resolution, accuracy +/- 1.5 sec/day

BST/GMT time change

Auto

Program cycle

24hr, 5/2day or 7day selectable

Program ON/OFFs per day

2on/off, 3on/off selectable

Program resolution

10mins

Program selection

Auto, On all day, On constant, off

Program override

1, 2 or 3 hour, Advance

Heating system

Pumped

Complies with

EN60730-1, EN60730-2.7, EMC Directive 2004/108/EC, LVD Directive 2006/95/EC

Changeover contacts voltage free inductive load (cos = 0.6)

100

Description

6