The Choice PR2n is a two channel programmer, designed for separate control of your heating and stored hot water. The heating and hot water programs are independent of each other, giving you the opportunity to save money and control your heating in the most energy saving manner possible.

The programmer can be configured for 24 hour, 5/2 day or 7 day operation with the flexibility of up to three on/off timings per day.

Pre-programmed but can easily be changed to suit your particular lifestyle

Large and clear to read illuminated display

Attractive modern design that will suit all contemporary homes

Suitable for pumped or gravity systems

24 hour, 5/2 day and 7 day selectable

2 or 3 ON/OFF periods selectable

1,2 or 3 hour boost

Advance to next programmed event

Automatic Summer/Winter time change

Holiday feature

Program options - ON, OFF, All day or Auto

Mains powered with battery backup

Standard wall plate - simple plug in and replace

Fully pumped central heating systems using mid-position valves, spring return valves or power open, power closed valves.

Gravity hot water, pumped heating systems with or without motorised valves fitted into the domestic hot water primary circuit.

Supply voltage

230V a.c.

Supply Frequency

50-60 Hz

Contact type

1B , Micro-Disconnection

Battery type

Lithium Cell CR2032

Operating temperature

0°C to 40°C

Total switch rating

230V AC, 2(1)Amp (per channel)

Enclosure protection

IP30

Plastics

Thermoplastic, flame retardant

Insulation class

Double

Wiring

4

Backplate

Industry standard

Dimensions

140 x 87 x 37mm

Clock

12 hour am/pm, 1 minute resolution, accuracy +/- 1.5 sec/day

BST/GMT time change

Auto

Program cycle

24hr, 5/2day or 7day selectable

Program ON/OFFs per day

2on/off, 3on/off selectable

Program resolution

10mins

Program selection

Auto, On all day, On constant, off

Program override

1, 2 or 3 hour, Advance

Heating system

Pumped or Gravity

Complies with

EN60730-1, EN60730-2.7, EMC Directive 2004/108/EC, LVD Directive 2006/95/EC

Changeover contacts voltage free inductive load (cos = 0.6)

100

Description

5