TM5SDM8DTS

Mod. 24Vdc 4DI/4DO Timestamp 1 wi

Trade Price

£183.26

Per

1

Unit

EA

Pack Quantity

1

TM5SDM8DTS

Information

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This discrete I/O module provides ' discrete inputs with sink discrete input logic and 4 source transistor outputs. It provides a rated supply voltage of 24V DC, a current consumption of 2mA at 5V DCbus, 62.5mA at 24V DC input/output, a maximum power dissipation of 1.51W. This product is part of a flexible and scalable I/O configuration for automation solutions. There is an isolation between channel and bus at 1500V AC for 1min. It is furnished with single wire for electrical connection. It is an IP20 rated product. Its housing colour is white.It weighs 0.022kg. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. This product is compatible with Sercos bus interface module. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

Technical Specifications

Range of product

Modicon TM5

Product or component type

Discrete I/O module

Discrete input number

4

Discrete input voltage

24 V

Discrete output number

4

Discrete output type

Transistor

range compatibility

PacDrive LMC motion controller

Product compatibility

PacDrive LMC Pro 2 PacDrive LMC Pro PacDrive LMC Eco

discrete input voltage type

DC

Input voltage limits

20.4...28.8 V

Discrete input logic

Sink

Discrete input current

1.3 mA

Input impedance

18.4 kOhm

Output voltage

24 V DC

Output voltage limits

20.4...28.8 V

discrete output logic

Source

Current per channel

0.1 A

Maximum current per output common

0.4 A

Colour

White

Peak output current

0.4 A

Switching frequency

<= 16 kHz resistive load

Input filtering

>= 2 µs hardware

Response time

<= 2 µs from state 0 to state 1 for output <= 2 µs from state 1 to state 0 for output

Maximum leakage current

25 µA when switched off

Protection type

Overload protection Short-circuit protection Inductive overvoltage

Isolation

No insulation between channels 500 Vrms AC insulation between channel and bus

Maximum voltage drop

<0.9 V at 0.1 A for output

Maximum supply current for sensors

600 mA

Current consumption

2 mA at 5 V DC bus 62.5 mA at 24 V DC input/output

Maximum power dissipation in W

1.51 W

Local signalling

1 LED green for power supply 1 LED red for power supply 8 LEDs for input/output status

Electrical connection

1 wire

Net weight

0.025 kg

standards

UL 508 CSA C22.2 No 142 EN/IEC 61131-2

product certifications

EAC cULus CE C-Tick

Ambient air temperature for operation

-10…60 °C with derating factor (horizontal installation) -10…50 °C with derating factor (vertical installation)

Ambient air temperature for storage

-40…70 °C

Relative humidity

5…95 % without condensation

IP degree of protection

IP20 conforming to EN/IEC 60529

Pollution degree

2 conforming to EN/IEC 61131-2

Operating altitude

0...2000 m

Storage altitude

0…3000 m

Vibration resistance

1 gn at 8.4…150 Hz on DIN rail 3.5 mm at 5…8.4 Hz on DIN rail

Shock resistance

15 gn for 11 ms

Electromagnetic compatibility

Electrostatic discharge immunity test, 4 kV on contact conforming to EN/IEC 61000-4-2 Electrostatic discharge immunity test, 8 kV in air conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz conforming to EN/IEC 61000-4-3 Electrical fast transient/burst immunity test, 1 kV I/O conforming to EN/IEC 61000-4-4 Electrical fast transient/burst immunity test, 1 kV shielded cable conforming to EN/IEC 61000-4-4 Electrical fast transient/burst immunity test, 2 kV power lines conforming to EN/IEC 61000-4-4 1.2/50 µs shock waves immunity test, 0.5 kV differential mode conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test, 1 kV common mode conforming to EN/IEC 61000-4-5 Conducted RF disturbances conforming to EN/IEC 61000-4-6 Conducted and radiated emissions conforming to CISPR 11

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

6.000 cm

Package 1 Width

2.000 cm

Package 1 Length

11.000 cm

Package 1 Weight

39.000 g

Unit Type of Package 2

S01

Number of Units in Package 2

42

Package 2 Height

15.000 cm

Package 2 Width

15.000 cm

Package 2 Length

40.000 cm

Package 2 Weight

1.844 kg

Warranty

18 months

Document Links

Datasheet