XACA481
PENDANT CONTROL STATION
Trade Price
£161.92
Per
1
Unit
EA
Pack Quantity
1
Information
This yellow, complete ready to use, pendant station for control circuits is designed for control of single-speed motors. Its design makes it simple and intuitive, but also very comfortable for the operator to use. It comprises a polypropylène enclosure with 4 standard push buttons mechanically interlocked between pairs. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. This robust pendant control station complies with the safety requirements of IEC standards.
Technical Specifications
Range of product
Harmony XAC
Product or component type
Pendant control station
Device short name
XACA
Control station type
Double insulated
Enclosure material
Polypropylene
Electrical circuit type
Control circuit
Enclosure type
Complete ready for use
Control station application
Control of single speed hoist motor
Control station composition
4 push-buttons
Control button type
First push-button 1 NC + 1 NO raise, slow Second push-button 1 NC + 1 NO lower, slow Fourth push-button 1 NC + 1 NO left, slow Third push-button 1 NC + 1 NO right, slow
Product compatibility
ZB2BE102 + ZB2BE101 for each direction
Mechanical interlocking
With mechanical interlocking between pairs
Control station colour
Yellow
Connections - terminals
Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end
standards
EN/IEC 60204-32 CSA C22.2 No 14 EN/IEC 60947-5-1 UL 508
product certifications
GOST CCC
Protective treatment
TH
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
Shock resistance
100 gn conforming to IEC 60068-2-27
Overvoltage category
Class II conforming to IEC 61140
IP degree of protection
IP65 conforming to IEC 60529
IK degree of protection
IK08 conforming to EN 50102
Mechanical durability
1000000 cycles
Cable entry
Rubber sleeve with stepped entry 8…26 mm
Contact code designation
A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
[Ithe] conventional enclosed thermal current
10 A
[Ui] rated insulation voltage
600 V (pollution degree 3)
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947-1
contact operation
Slow-break
Maximum resistance across terminals
25 MOhm
Operating force
13 N push-button
Short-circuit protection
10 A fuse protection by cartridge fuse type gG
Rated operational power in W
40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
Terminals description ISO n°1
(13-14)NO (11-12)NC
Terminal identifier
(11-12)NC (13-14)NO
Net weight
0.675 kg
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
8.400 cm
Package 1 Width
9.200 cm
Package 1 Length
44.500 cm
Package 1 Weight
766.000 g
Unit Type of Package 2
P06
Number of Units in Package 2
48
Package 2 Height
75.000 cm
Package 2 Width
60.000 cm
Package 2 Length
80.000 cm
Package 2 Weight
49.768 kg
Warranty
18 months
Document Links
Datasheet
Product Catalogue