ATS01N206LU
ATS01 6A Soft start/stop 200-240V
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market, it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings, possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Technical Specifications
Range of product
Altistart 01
Product or component type
Soft starter
Product destination
Asynchronous motors
Product specific application
Simple machine
Device short name
ATS01
Network number of phases
3 phases
[Us] rated supply voltage
200...240 V - 10...10 %
Motor power kW
0.75 kW, 3 phases at 200...240 V 1.1 kW, 3 phases at 200...240 V
Motor power hp
1 hp, 3 phases at 200...240 V 1.5 hp, 3 phases at 200...240 V
IcL starter rating
6 A
Utilisation category
AC-53B conforming to EN/IEC 60947-4-2
Current consumption
30 A at nominal load
Type of start
Start with voltage ramp
Power dissipation in W
4 W at full load and at end of starting 64 W in transient state
Assembly style
With heat sink
Function available
Integrated bypass
Supply voltage limits
180…264 V
Supply frequency
50...60 Hz - 5...5 %
Network frequency
47.5...63 Hz
Output voltage
<= power supply voltage
[Uc] control circuit voltage
Built into the starter
Starting time
1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s
Deceleration time symb
Adjustable from 1 to 10 s
Starting torque
30...80 % of starting torque of motor connected directly on the line supply
Discrete input type
Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage
24...40 V
Discrete input logic
Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
Discrete output current
2 A DC-13 3 A AC-15
Discrete output type
Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO
Discrete output voltage
24 V (voltage limits: 6...30 V) open collector logic
Minimum switching current
10 mA at 6 V DC for relay outputs
Maximum switching current
Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
Display type
1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached
tightening torque
0.5 N.m 1.9…2.5 N.m
Electrical connection
4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Marking
CE
Operating position
Vertical +/- 10 degree
height
124 mm
Width
45 mm
Depth
131 mm
Net weight
0.42 kg
Compatibility code
ATS01N2
Motor power range AC-3
0.55…1 kW at 200…240 V 3 phases 1.1…2 kW at 200…240 V 3 phases
Motor starter type
Soft start
Document Links
Datasheet
Brochure