ATV12P037M2
ATV12 0.37KW 240V 1PH IP20 PLATE
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.37kW / 0.55hp and a rated voltage from 200V to 240V AC. It is designed on a base plate for mounting on the machine frame. The frame surface area should allow heat to dissipate. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings. The ATV12 range meets basic machine requirements united with simplicity.
Technical Specifications
Range of product
Altivar 12
Product or component type
Variable speed drive
Product specific application
Simple machine
Mounting mode
Cabinet mount
Communication port protocol
Modbus
Supply frequency
50/60 Hz +/- 5 %
[Us] rated supply voltage
200...240 V - 15...10 %
Nominal output current
2.4 A
Motor power hp
0.55 hp
Motor power kW
0.37 kW
EMC filter
Integrated
IP degree of protection
IP20
Discrete input number
4
Discrete output number
2
analogue input number
1
analogue output number
1
Relay output number
1
Physical interface
2-wire RS 485
Connector type
1 RJ45
Continuous output current
2.4 A at 4 kHz
Method of access
Server Modbus serial
Speed drive output frequency
0.5…400 Hz
Speed range
1…20
Sampling duration
20 ms, tolerance +/- 1 ms for logic input 10 ms for analogue input
Linearity error
+/- 0.3 % of maximum value for analogue input
Frequency resolution
Analog input: converter A/D, 10 bits Display unit: 0.1 Hz
Time constant
20 ms +/- 1 ms for reference change
Transmission rate
9.6 kbit/s 19.2 kbit/s 38.4 kbit/s
Transmission frame
RTU
Number of addresses
1…247
Data format
8 bits, configurable odd, even or no parity
Communication service
Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43)
Type of polarization
No impedance
4 quadrant operation possible
False
Asynchronous motor control profile
Sensorless flux vector control Quadratic voltage/frequency ratio Voltage/frequency ratio (V/f)
Maximum output frequency
4 kHz
Transient overtorque
150…170 % of nominal motor torque depending on drive rating and type of motor
Acceleration and deceleration ramps
U Linear from 0 to 999.9 s S
Motor slip compensation
Preset in factory Adjustable
Switching frequency
2...16 kHz adjustable 4...16 kHz with derating factor
Nominal switching frequency
4 kHz
Braking to standstill
By DC injection
Brake chopper integrated
False
Line current
5.9 A at 100 V (heavy duty) 4.9 A at 120 V (heavy duty)
Maximum input current
4.9 A
Maximum output voltage
240 V
Apparent power
1.2 kVA at 240 V (heavy duty)
Maximum transient current
3.6 A during 60 s (heavy duty) 4.0 A during 2 s (heavy duty)
Network frequency
50...60 Hz
Relative symmetric network frequency tolerance
5 %
Prospective line Isc
1 kA
Base load current at high overload
2.4 A
Power dissipation in W
Natural: 27.0 W
With safety function Safely Limited Speed (SLS)
False
With safety function Safe brake management (SBC/SBT)
False
With safety function Safe Operating Stop (SOS)
False
With safety function Safe Position (SP)
Document Links
Datasheet
Product Catalogue