ATV12H018F1
ATV12 0.18KW 120V 1PH IP20
Trade Price
£146.67
Per
1
Unit
EA
Pack Quantity
1
Information
This Altivar 12 variable speed drive can feed single phase asynchronous motors. It works at a rated power up to 0.18kW / 0.25hp and a rated voltage from 100V to 120V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. Transient overtorque function prevents stoppages by unjamming the machine with extra torque, when needed, this reduces downtime and maintenance costs. It features underload and overload detection, this contribute to protect your installation. The Altivar 12 drive integrates as standard the Modbus communication protocol, which can be accessed via the RJ45 connector located on the underside of the drive. It is designed for simple industry and commercial machines and appliances, such as conveyors, pumps, extractors, access barriers and treadmills. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.
Technical Specifications
Range of product
Altivar 12
Product or component type
Variable speed drive
Product specific application
Simple machine
Mounting mode
Cabinet mount
Communication port protocol
Modbus
Supply frequency
50/60 Hz +/- 5 %
[Us] rated supply voltage
100...120 V - 15...10 %
Nominal output current
1.4 A
Motor power hp
0.25 hp
Motor power kW
0.18 kW
EMC filter
Without EMC filter
IP degree of protection
IP20
Discrete input number
4
Discrete output number
2
analogue input number
1
analogue output number
1
Relay output number
1
Physical interface
2-wire RS 485
Connector type
1 RJ45
Continuous output current
1.4 A at 4 kHz
Method of access
Server Modbus serial
Speed drive output frequency
0.5…400 Hz
Speed range
1…20
Sampling duration
20 ms, tolerance +/- 1 ms for logic input 10 ms for analogue input
Linearity error
+/- 0.3 % of maximum value for analogue input
Frequency resolution
Analog input: converter A/D, 10 bits Display unit: 0.1 Hz
Time constant
20 ms +/- 1 ms for reference change
Transmission rate
9.6 kbit/s 19.2 kbit/s 38.4 kbit/s
Transmission frame
RTU
Number of addresses
1…247
Data format
8 bits, configurable odd, even or no parity
Communication service
Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43)
Type of polarization
No impedance
4 quadrant operation possible
False
Asynchronous motor control profile
Quadratic voltage/frequency ratio Voltage/frequency ratio (V/f) Sensorless flux vector control
Maximum output frequency
4 kHz
Transient overtorque
150…170 % of nominal motor torque depending on drive rating and type of motor
Acceleration and deceleration ramps
S U Linear from 0 to 999.9 s
Motor slip compensation
Adjustable Preset in factory
Switching frequency
2...16 kHz adjustable 4...16 kHz with derating factor
Nominal switching frequency
4 kHz
Braking to standstill
By DC injection
Brake chopper integrated
False
Line current
6.0 A at 100 V (heavy duty) 5.0 A at 120 V (heavy duty)
Maximum input current
5.0 A
Maximum output voltage
240 V
Apparent power
0.6 kVA at 240 V (heavy duty)
Maximum transient current
2.1 A during 60 s (heavy duty) 2.3 A during 2 s (heavy duty)
Network frequency
50...60 Hz
Relative symmetric network frequency tolerance
5 %
Prospective line Isc
1 kA
Base load current at high overload
1.4 A
Power dissipation in W
Natural: 18.0 W
With safety function Safely Limited Speed (SLS)
False
With safety function Safe brake management (SBC/SBT)
False
With safety function Safe Operating Stop (SOS)
False
With safety function Safe Position (SP)
False
With safety function Safe programmable logic
False
With safety function Safe Speed Monitor (SSM)
Document Links
Datasheet
Product Catalogue